Superchips FlashCal Programmer for Jeep Wrangler JL(3571-JL)

Posted on


The SuperChips FlashCal Programmer High Definition 2.8 Inch Color Screen. Increased Memory For Faster Processing. Speedometer Correction For Changes In Tire Size/Gear Ratio. Adjustable Axle Gear Ratio. Speed/Rev Limiter Options Based On Fitment. TPMS Options Based On Fitment. Adjustable Shift Points/Shift Firmness. Adjustable Daytime Running Lights. Reads And Clears Diagnostic Trouble Codes. Internet Updatable

Why It’s Helpful:

For those of us who like to do mods and upgrades to our Jeeps this Programmer allows us to custom set features in the Jeep. For example the Tire Pressure Monitoring system. If you like to air down your tires on the trail you will get the TPMS Warning if you go below the factory set alarm. Also, if upgrading to bigger tires you will need to program the jeep to register the new tire size to adjust the transmission shift points. Theres also other features like disabling the Auto Shutoff, etc. A more complete list of features is:

  • Tire Size Adjustment: 25” – 40”
  • TPMS On/Off (Remove Dash Screen)
  • Gear Ratio Adjustment: 2.73, 3.07, 3.21, 3.55, 3.73, 4.10, 4.56, 4.88, 5.13, 5.38
  • Transfer Case Low: 2.72, 3.00, 3.80, 4.00, 4.10, 4.30, 5.00
  • Sway Bar Disconnect in 2HI (up to 25 MPH, disconnects sway bar)
  • One Touch Lane Change On/Off
  • Fog Light Dropout On/Off
  • Daytime Running Light Dropout On/Off
  • Auto Park On/Off (live feature)
  • Auto Start/Stop (refer to user manual)
  • Reads & Clears Diagnostic Trouble Codes
  • Daytime Running Light Location
    • High Beam
    • Low Beam
    • Turn Signal
    • Fog Lights
    • European / Fender Lights

Leave a Reply

*Please note that this post contains affiliate links and any sales made through such links will reward me a small commission – at no extra cost for you.